Installation, Operation and Maintenance Manual
VCIOM-15746-EN Rev. 0
June 2021
Installation
5
Section 3: Installation
Put the plastic distances 8 mm between logic and relay board, insert the M3x16 steel
screws through the estimated holes next to multi pin connector in logic board, plastic
distances and relay board and secure the screws with the red lock plates. For the 3
rd
hole
use the plastic screw M3x15 and secure it with plastic nut.
Figure 8
Connect the relay board with the multi-pin connector from the logic board.
NOTE
4 pins must stay free see FIgure 9.
Orientation brings the mounting holes of both boards – they must be in line.
Figure 9
