Emerson BELLA CF442AW, Руководство пользователя

Страница: 5 / 20

3. Ceiling Fan Assembly
5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF442
1. Rotate the motor hub to align the hub motor area
over each of the five shipping retainers. One by one
unscrew each of the five screws and discard screws
and shipping retainers (Figure 1).
2.
Mount blade flanges to fan blades using three M5 x
6mm washer head blade screws (Figure 2).
NOTE: Take care not to scratch fan housing when
installing blades.
3.
Loosely attach one blade/flange assembly to the
motor hub by securing the two M6 x 14mm captive
pan head screws. Make sure the screws are NOT
tightened (Figure 3). Repeat this procedure for other
four blade assemblies.
SWITCH
HOUSING
ADAPTER
REMOVE AND DISCARD THE
FIVE SHIPPING SPACERS
AND SCREWS FROM THE
MOTOR HUB
Figure 1
BLADE
FLANGE
M5 x 6mm WASHER HEAD
BLADE SCREW (3 per
blade/flange)
FAN BLADE
Figure 2
MOTOR HUB
BLADE/FLANGE
ASSEMBLY
MOTOR HUB
NOTCHED AREA
M6 x 14mm CAPTIVE PAN
HEAD SCREW (2 per
blade/flange assembly)
Figure 3
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
WARNING
!
4.
The blade flanges have an interlocking feature that
must be fully engaged before tightening the screw.
Make sure all the flanges are properly engaged and
then tighten the flange screws. If one of the flanges
does not seat properly on the motor hub, loosen the
adjacent flange screws, re-engage and reseat the
flanges, then tighten the screws again.