background image

9

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.: CF810

Three-Speed

1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF

Reverse Switch Information

Season

Rotation Direction

Switch Position

Summer

Counter-Clockwise

Left

Winter

Clockwise

Right 

1.

Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.

2.

Check the operation of the fan by gently pulling on
the pull chain switch.

3.

All fans are shipped from the factory with the
reversing switch positioned to the “left” circulate air
downward. If airflow is desired in opposite
direction, turn your fan OFF and wait for the blades
to stop turning, then slide the reversing switch to the
“right” position, and turn fan on again.

• Warm weather - (Counterclockwise) A downward air

flow creates a cooling effect. This allows you to set
your air conditioner on a higher setting without
affecting your comfort. The switch is in the left
position.

• Cool weather - (Clockwise) An upward air flow

moves warm air off the ceiling. This allows you to set
your heating unit on a lower setting without affecting
your comfort. The switch is in the right position.

4.

The fan blades will turn in the opposite direction and
reverse the airflow. 
Your fan model is equipped with a 4-position,
3-speed pull chain switch. The operating sequence
is as follows:

Using Your Ceiling Fan

Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.

WARNING

!

REVERSING
SWITCH

SPEED 
CONTROL
SWITCH 
PULL
CHAIN

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

Maintenance

Содержание AVONDALE CF810AP

















Отзывы: