Emerson AMS Trex, Руководство пользователя

Страница: 98 / 214

3.15.1 Create a HART configuration
Create a new configuration for a specific device type and revision. You can then apply this
configuration to multiple devices.
Procedure
1. In the Field Communicator application, tap HART Offline .
2. Tap Offline Config > New .
3. Tap a manufacturer.
4. Tap a device type.
5. Tap a device revision.
6. Tap OK .
7. Select and edit the necessary parameters.
8. Tap OK to mark the parameter for writing.
Note
Unmarked parameters are saved but not sent when you transfer the configuration to a
connected device.
9. Tap Save when you finish editing the parameters.
10. Enter a name for the configuration, and tap
OK
.
The configuration file is saved.
3.15.2 Edit a HART configuration
Prerequisites
Note
Do not edit a configuration on the Trex unit while you are connected to the Configuration
Management PC application.
Procedure
1. In the
Field Communicator
application, tap
HART Offline
.
2. Tap Offline Config > Edit Existing .
3. Tap the column heading to sort configurations by File Name or Tag. Select the
configuration you want to edit, and tap
OK .
4. Select and edit the parameters.
5. Tap the checkbox to mark the parameter for writing.
Note
Unmarked parameters are saved but not sent when you transfer the configuration to a
connected device.
Field Communicator application
90 User Guide