manualshive.com logo in svg

Emerson AMS Trex, Руководство пользователя

Поделиться
Скачать
Emerson AMS Trex Скачать руководство пользователя страница 123

3.

Tap 

DD Information

.

The device description information is displayed.

4.

Tap 

OK

.

3.25

View Help for a device parameter

1.

Go to the desired parameter in the connected device.

2.

Press and hold the parameter.

A menu appears.

3.

Tap 

Help

.

The help text is displayed.

4.

Tap 

OK

 to close the Help screen.

3.26

Graphics

The Electronic Device Description Language (EDDL) capabilities let the Trex unit display
graphics for the connected devices. You can view HART or FOUNDATION fieldbus device
information as images, charts, and graphs.

Each type of graphic lets you zoom in, zoom out, and reset the graphic. You can also use
the drop down box to select a variable, if multiple variables are displayed.

Graphics options

Figure 3-46:   

A.

Select a variable. The selected variable is displayed with a bold line.

B.

Reset the zoom level.

C.

Zoom out

D.

Zoom in

3.26.1

Images

An image is a full-screen picture of a device. Images can include logos and various
graphics, such as tanks. To view the image, select the image or drawing label in the menu.
The full screen image is shown. To close the image, tap the touchscreen.

Field Communicator application

User Guide 

115

Содержание AMS Trex























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды