Emerson AE8-1384 R6 Скачать руководство пользователя страница 3

Страница: 3 / 19

AEX-XXXX

PRELIMINARY

AE8-1384 R6

WARNING

CAUTION

Instructions Pertaining to Risk of Electrical Shock, Fire, or Injury to Persons

WARNING

ELECTRICAL SHOCK HAZARD

• Disconnect and lock out power before servicing.

• Discharge all capacitors before servicing.

• Use compressor with grounded system only.

• Molded electrical plug must be used when required.

• Refer to original equipment wiring diagrams.

• Electrical connections must be made by qualified electrical personnel.

• Failure to follow these warnings could result in serious personal injury.

WARNING

PRESSURIZED SYSTEM HAZARD

• System contains refrigerant and oil under pressure.

• Remove refrigerant from both the high and low compressor side before removing compressor.

• Use appropriate back up wrenches on rotalock fittings when servicing.

• Never install a system and leave it unattended when it has no charge, a holding charge, or

with the service valves closed without electrically locking out the system.

• Use only approved refrigerants and refrigeration oils.

• Personal safety equipment must be used.

• Failure to follow these warnings could result in serious personal injury.

WARNING

BURN HAZARD

• Do not touch the compressor until it has cooled down.

• Ensure that materials and wiring do not touch high temperature areas of the compressor.

• Use caution when brazing system components.

• Personal safety equipment must be used.

• Failure to follow these warnings could result in serious personal injury or property damage.

CAUTION

COMPRESSOR HANDLING

• Use the appropriate lifting devices to move compressors.

• Personal safety equipment must be used.

• Failure to follow these warnings could result in personal injury or property damage.

Safety Statements

• Refrigerant compressors must be employed only for their intended use.

• Only qualified and authorized HVAC or refrigeration personnel are permitted to install, commission and maintain

this equipment.

• Electrical connections must be made by qualified electrical personnel.

• All valid standards and codes for installing, servicing, and maintaining electrical and refrigeration equipment must

be observed.

Содержание AE8-1384 R6




















Результаты поиска

Содержание AE8-1384 R6

Отзывы:

Похожие инструкции для AE8-1384 R6

Бренды по названию

Популярные бренды

Emerson AE8-1384 R6, Бюллетень по инженерному применению

Результаты поиска

Содержание AE8-1384 R6

Отзывы:

Похожие инструкции для AE8-1384 R6

Бренды по названию

Популярные бренды