manualshive.com logo in svg

Emerson 781S, Справочное руководство, Страница: 25 / 134

Поделиться
Скачать
Emerson 781S Скачать руководство пользователя страница 25

Figure 3-3: Mounting Location

A. Control room

B. Ground

C. Smart Antenna

D. Mast or pipe

E. Infrastructure

3.5.1

Emerson Smart Antenna pipe mount

Procedure

1. Insert U-bolt around 2-in. pipe/mast, through the saddle, through the L-shaped

bracket, and through the washer plate.

2. Use a 

½

-in. socket-head wrench to fasten the nuts to the U-bolt.

3. Insert single bolt through L-shaped bracket into the antenna.
4. Use a 5/16 socket-head wrench to fasten bolt to bracket.

3.5.2

Antenna position

The Emerson 781S Smart Antenna is an omni-directional antenna that does not require
specific horizontal positioning for optimal network connectivity. It should be mounted
vertically upright in the center of the network for the most direct device connections to
the Gateway.

3.6

Connecting the Emerson 1410S to the 781S
Smart Antennas

There are two main connection configurations for the Emerson 1410S and 781S Smart
Antennas: with and without intrinsically safe barriers. The hazardous location approval
option of the Emerson 781S determines whether it needs to be installed with barriers. This
connection is integrated in the Gateway electronics and can be selected upon order.
Selecting the IS barrier option will provide IS barriers integrated into the Gateway. This will

Reference Manual

Installing the Gateway

00809-0600-4410

May 2020

Emerson 1410S/781S

25

Содержание 781S







































































































































Отзывы:

Нет отзывов