Emerson 781S Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 134

Emerson 781S Скачать руководство пользователя страница 86

5

Software installation (optional)

5.1

Installation instructions

The 2-disk software pack contains the Security Setup Utility (only required
for secure host connections or OPC communications) and AMS Wireless
Configurator. The Security Setup Utility is located on Disk 1.

Procedure

1. Exit/close all Windows programs, including any running in the

background, such as virus scan software.

2. Insert Disk 1 into the CD/DVD drive of the PC.
3. If the setup program does not appear, go into the disk's file and run

autorun.exe.

4. Follow the prompts.
5. Insert Disk 2 into the CD/DVD drive of the PC.
6. Select

Install

from the menu when the AMS Wireless Configurator

setup begins.

7. Follow the prompts.
8. Allow AMS Wireless Configurator to reboot PC.
9. Do not remove the disk from the CD/DVD drive.

10. Installation will resume automatically after login.
11. Follow the prompts.

Note

If the autorun function is disabled on the PC, or installation does not
begin automatically, double click D:\SETUP.EXE (where D is the
CD/DVD drive on the PC) and select

OK

.

For more information about the Security Setup Utility and AMS
Wireless Configurator, see the Emerson 1410S Gateway and 781S
Smart Anetennas Reference Manual.

March 2020

Quick Start Guide

Quick Start Guide

19

«
...
84
85
86
87
88
...
»

Содержание 781S







































































































































Отзывы:

Нет отзывов