Emerson 2130 RBM Consultant Pro, Справочное руководство

Страница: 351 / 394

5-9
Straightness Laser Configuration
From the Laser Configuration screen you can configure the location for each of
the laser heads during the profile measurements, check and set the heads and ana-
lyzer address, and check the operational status of the heads. The Laser Configura-
tion screen is reached by pressing the Laser Config key on the Alt Main screen.
Straightness Laser Configuration Screen
The location of each head is based on how the profile is viewed. It does not matter
which head is on one side or another; however, the analyzer must know each head’s
location.
Although both Head A and Head B of the older version of Model 8215/8225 laser
heads have gray front panels with black grid lines, A and B are marked on the front
panel of the laser head. The newer version of Model 8215/8225 laser heads have A
and B marked on the front panel, and in addition can be identified by their dif-
ferent colored front panels. Head A has a gray front panel with white grid lines
while Head B has a blue front panel with white grid lines.