Emerson 2130 RBM Consultant Pro, Справочное руководство

Страница: 326 / 394

4-40 Vertical Alignment
Enter key
Use the Enter key to advance to the next step in the Offset Move screen.
Angular Move Function Keys
Raise Machine
Use the Raise Machine key to display the shim values equivalent to raising the
machine. In this case, all shim values will be positive.
Median
Use the Median key to display the shim values equivalent to making the smallest
moves. In this case, the shim values are centered about an average; therefore, they
will be a mixture of positive and negative values.
Lower Machine
Use the Lower Machine key to display the shim values equivalent to lowering the
machine. In this case, all shim values will be negative.
Switch Move Type
Use the Switch Move Type key to toggle the displayed move type between Angular
Move and Offset Move.
Data Detail
Use the Data Detail key to advance to the tolerance plot screens where graphical
representations of the alignment condition can be reviewed. Refer to the Vertical
Data Detail (Tolerance Plots) section on page 4-45 for more information. In addi-
tion, you can manually condition or edit the sine curve data using the edit data
function.