1 3
Listening To The Radio
Digital Radio Frequency Display
This clock radio features a digital radio frequency display instead of a dial scale to
make tuning easier, especially in a dark room. The LED time display automatically
changes to a radio frequency display as soon as you begin turning the
TUNING
control. And the display automatically changes back to the correct time within 10
seconds after you release the
TUNING
control.
1.) Set the Band
AM/FM
selector switch to the desired band,
AM
or
FM
.
2.) Set the
VOLUME
control to a low setting.
3.) Press the
RADIO ON/OFF
button to turn the radio ‘On’. The display changes
from time to an AM or FM radio frequency display.
4.) Turn the
TUNING
control to the left-
side to select higher numbered
frequencies or to the right-side to
select lower numbered frequencies.
Important: It is not necessary to tune to the exact frequency of your
desired station. Just rotate the TUNING control until you find the
strongest signal and the best reception, even if the frequency number
on the display is higher or lower than the actual station frequency.
W ithin 10 seconds after you release the
TUNING
control the display
automatically changes back to the correct time.
5.) Adjust the
VOLUME
control to the desired setting.
6.) When you are finished listening, press the
RADIO ON/OFF
button to turn
the radio ‘Off’.
(High Low)
CKS1855_053007.p65
30/5/2007, 14:16
13
