EP-RFBASE Installation Instruction
Description:
This base is suitable for use with the following EmeraldPlanet smoke alarm
models:
EP-HW-240-R1
EP-HW-240-Li10
EP-HW-240-Li10v2
Product Specifications:
1.
POWER: 220-240V~/50Hz, built-in DC3V(CR123A) Lithium battery
(battery not replaceable)
2. BATTERY LIFE: ten years
3. OPERATION CURRENT:<12uA (quiescent), <30 mA (RF emitter)
4. OPERATING TEMPERATURE: -5 to 45
o
C
5. AMBIENT HUMIDITY: 5% to 95%
6. WIRELES RF Frequency:433.42MHz
7. WIRED INTERCONNECTION: up to 40 detectors
8. WIRELESS RF INTERCONNECTION: up to 40 detectors
9. WIRELESS RF RANGE:>100 meters in free field
10. COMPLIES WITH:AS/NZS 60065, AS/NZS 60950.1, AS/NZS 4268
NOTE: The maximum number of wired interconnections and wireless
interconnections is up to 40 detectors.
Important Safety Information:
1. This device is not suitable for use in
damp/moist/wet areas.
2. Not suitable for use with non-pure
sinusoidal power sources. (e.g. derived
from square-wave invertors).
3. Only to be installed by a licenced
electrician.
4. Observe and follow all local and national
electrical and building codes for
installation.
Wireless function description:
Warning: wireless bases use coded RF signals
and need to be paired before use.
Pairing Instructions:
Note: Before pairing, the unit must be
connected to a smoke alarm and be in normal
working mode.
