EMERALD PLANET HEAD OFFICE - SYDNEY
Unit 2 / 29 Mitchell Road, Brookvale NSW 2100 Australia
P
02 9466 6000
SMOKE ALARM
USER MANUAL
POWER:
DC2*1.5V Alkaline AA battery
OPERATION CURRENT:
<4uA (standby), <40mA (alarm)
ALARM VOLUME:
>85dB(A) at 3 meters
SMOKE SENSITIVITY:
0.09-0.140dB/m
HEAT SENSITIVITY:
54-70
o
C
LOCAL SMOKE ALARM
ISO8201 BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s – BI
SOUND PATTERN:
0.5s – pause 1.5s, with the red LED flash, repeat this
alarm pattern.
LOCAL HEAT ALARM
BI 0.2s - pause 0.1s, with the red LED flash,
SOUND PATTERN:
repeat this alarm pattern.
WIRELESS ALARM
Bi - Bi - pause 1.2s, with the red LED flash,
SOUND PATTERN:
repeat this alarm pattern.
DESCRIPTION
This unit uses a photoelectric smoke detection
chamber. Photoelectric technology is more
sensitive to detecting slow smoldering fires which
generate thick, black smoke, a little heat and may
smolder for hours before bursting into flames.
Unlike previous ionizing alarms, this smoke alarm
does not contain radioactive material and is
harmless to the environment.
Emerald Planet recommends that smoke alarms
be installed in every room (except bathrooms
and kitchens), and every other area of the home,
making sure all people in the home will be able to
hear and respond to the alarm when activated.
Each state of Australia has its own legislation
regarding smoke alarm requirements. Please refer
to the following websites to check your states
current installation requirements.
NSW
fire.nsw.gov.au/page.php?id=80
QLD
www.qfes.qld.gov.au/community-safety/smokealarms
SA
mfs.sa.gov.au/site/community_safety/home_fire_and_life_
safety_information_sheets_domestic/smoke_alarms_what_
you_need_to_know.jsp
WA
dfes.wa.gov.au/safetyinformation/fire/fireinthehome/
FireintheHomeManualsGuidelines/DFES_FireintheHome-
SmokeAlarm-Legislative-Requirements-LAWS.pdf
TAS
tfseducation.com.au/resources/publications
ACT
esa.act.gov.au/community-information/home-fire-safety/
smoke-alarms/
NT
https://nt.gov.au/emergency/community-safety/
fire-safety-at-home/smoke-alarms
MODEL NUMBER: EP-RF-R1
Thank you for choosing this smoke alarm wireless
interconnectivity and heat detection. Please take a
few minutes to read the user’s manual thoroughly
and familiarise yourself and your family with its
operation, and save it for future reference.
This unit has been designed to meet the latest
safety standards demanded in Australia and
complies with the requirements of AS3786:2014.
