background image

MAN-OVERBOARD ALARM SYSTEM

OWNER’S MANUAL

INTRODUCTION

The ALERT2 Man-Overboard Alarm System™ consists of the ALERT2 Receiver and 

one or more ALERT2 Transmitters. Upon activation of the Transmitter by either totally 

immersing the ALERT2 Transmitter in water (salt or fresh), or by manual activation, a 

coded radio signal will be transmitted to the ALERT2 Receiver, causing the internal 

alarm  to  sound,  and  the  relay  contacts  to  function,  activating  any  auxiliary  devices 

connected. Both the Transmitter and Receiver will latch to the MOB condition once 

activated, so that the Transmitter will continue to transmit even if removed from wa-

ter until turned off, and the Receiver will continue to sound its alarm until turned off. 

The range of the System is one nautical mile maximum and depends on the antenna 

installation, sea conditions, and position of the man-overboard.

 

The  ALERT2  Transmitter  and  the  ALERT2  Receiver  comply  with  the  U.S.  Federal 

Communications Commission Rules (Part 15), and with Industry Canada Rules, and do 

not require a license. Changes or modifications to the ALERT2 Transmitter or ALERT2 

Receiver not expressly approved by Emerald Marine Products could void the user’s 

authority to operate these devices, and will void the warranty.

SPECIFICATIONS

ALERT2 Man-Overboard Transmitter

:

Weight:  

4 ounces with batteries

Dimensions:  

5.5” x 1.5” x .75”

Case:  

High impact polycarbonate

Watertight integrity:  

200 feet water depth maximum

Power supply:  

Two 3.6 volt AA size lithium batteries (NOT 1.5 volt AA)

Controls:  

Off/Armed

Attachment:  

Nylon pouch

Approvals:  

FCC & Industry Canada. No license required

Frequency:  

418MHz

Range:  

One nautical mile

Antenna:  

Internal

Transmitting life:  

Three hours minimum at -4F (-20C)

Operating temperature: 

-4F to 130F (-20C to 55C)

Storage temperature: 

-40F to 158F (-40C to 70C)

ALERT2 Man-Overboard Receiver

Power supply:  

12 volt, 100 mA external

Dimensions:  

4” W x 2” H x 5” D

Weight:  

12 ounces

Mounting:  

Yoke bracket or flush mount kit (included)

Antenna:  

18” whip with 25’ coaxial cable

Internal alarm:  

95dB, front panel mounted GPS/Chartplotter/ Remote  

 

alarm/Engine shutdown: Relay contacts normally open, 

 

and normally closed, 1A maximum 

Operating temperature: 

-4F to 130F (-20C to 55C)

Storage temperature: 

-40F to 158F (-40C to 70C)

ALERT2 Man-Overboard Portable Direction Finder

™ 

(not pictured in manual):

Dimensions:  

20” x 14” x 4” 

Weight:  

2 pounds 

Controls:  

OFF/ON/Volume

Power supply:  

one 3.6 volt AA size lithium battery

Indicator:  

Spray tight loud speaker

Warranty on all ALERT2 products: 3 year parts and labor
Product is Made in the U.S.A.

6206 1ST AVENUE NW
SEATTLE, WASHINGTON | 98107
P. 206.965.8207 
TOLL FREE 800.426.4201

WWW.ALERT2.COM

6206 1ST AVENUE NW
SEATTLE, WASHINGTON | 98107
P. 206.965.8207 
TOLL FREE 800.426.4201

WWW.ALERT2.COM

Отзывы: