EMC2 VNXe3150, Руководство по аппаратным средствам

Страница: 43 / 56

System component description 41
Overview
Figure 27 DAE with two LCCs and two power supply/cooling modules (rear view)
Each LCC independently monitors the environmental status of the entire enclosure, using
a microcomputer-controlled monitor program. The monitor communicates the status to
the storage processor, which polls disk enclosure status. LCC firmware also controls the
SAS PHYs (physical links) and the disk-drive status LEDs.
Figure 27 on page 41 shows the location of the enclosure ID indicator
8
on each LCC. Each
LCC also includes a bus (back-end port) identification indicator. The SP initializes the bus
ID when the operating system is loaded.
DAE AC power supply/cooling module
Figure 28 on page 42 shows an example of the 2U, 12 (3.5-inch) disk drive DAE AC power
supply/cooling module with a power in (recessed) connector (plug) and status LEDs.
1 LCC B AC power supply power in (recessed
plug)
7 LCC B fault LED (on, amber)
2 LLC B power supply LED (on, green) 8 DAE enclosure ID
1
1. The DAE enclosure ID is sometimes referred to as the enclosure address (EA).
3 LCC B power supply fault LED (on, amber) 9 LCC B loop bus ID
4 LCC B power supply fan fault LED (on,
amber)
10 LCC B SAS connector (input); labeled with
a double black circle (or dot) symbol
.
5 LCC B right latch handle 11 LCC B SAS connector (output); labeled
with a double black diamond symbol
.
6 LCC B power LED (on, green)
X4
6Gb SAS
1
#
X4
6Gb SAS
1
X4
6Gb SAS
1
#
X4
6Gb SAS
LCC A LCC B
2 3 4 5
8
7 9 10 11 6
VNX-000091
8. The enclosure ID is sometimes referred to as the enclosure address (EA).