29
WEEE Disassembly Instructions for the Li Ion (SPS), doc #302-000-589
12.4
Disassembling the SPS chassis
1.
Using a Philips screwdriver, remove the six (6) fasteners that secure the SPS chassis lid. Notice
that one of the screws may be under a label. If so, peel the label back to access the fastener.
Figure 26. Location of chassis lid fasteners
2.
Slide the lid towards the SPS battery opening until the four lid latches disengage from the
chassis. Then lift the chassis lid from the SPS.
Figure 27. Removing the SPS chassis lid
Figure 28. SPS with chassis lid removed
