EMC VPLEX, Инструкция по установке и настройке

Страница: 64 / 94

EMC VPLEX with GeoSynchrony 4.1 Installation and Setup Guide 64
Setting up VPLEX
Note: Over the course of setting up a dual-engine or quad-engine cluster, the log file can
grow quite large.
Note: The log file saves data from the current PuTTY session. Any time you open a new
session, you must repeat this step if you want to log the output for that session.
Figure 48 PuTTY Configuration: Logging window
29. Select Session in the Category list, and click Save in the PuTTY Configuration
window to save the settings for the session you configured.
30. Click Open , and log in to the management server with username service and
password Mi@Dim7T .
31. Type the following command to connect to the VPlexcli:
vplexcli
Log in with username service and password Mi@Dim7T .
Task 9: Launch the
VPLEX EZ-Setup
Wizard on cluster 2 The EZ-Setup Wizard performs several tasks to set up a VPLEX implementation,
based on a series of prompts for user-entered information. Refer to the
EMC VPLEX
Pre-installation Configuration Worksheet as you respond to the prompts.
From the VPlexcli prompt, type the following command, and follow the steps in the
automated interview and configuration procedure:
configuration system-setup
p u tty_log
All session output
File name
Note: At any time, you can exit EZ Setup by typing the following command:
To resume the setup, type the following command:
configuration system-setup
When you resume EZ Setup, the wizard returns to the first step. However, any values
you already entered now appear as the new default values.
exit