manualshive.com logo in svg

EMC Symmetrix DMX-3, Руководство по эксплуатации продукта, Страница: 186 / 326

Поделиться
Скачать
EMC Symmetrix DMX-3 Скачать руководство пользователя страница 186

186

EMC Symmetrix DMX-3 Product Guide

Data Integrity, Availability, and Protection

RSA enVision also provides configurable security alerts with 
thresholds based on the frequency of various security-related events, 
such as the following:

◆

Denied login attempts on a host 

◆

Denied login attempts on the service processor

◆

Attempts to escalate privileges on Solutions Enabler 

◆

Attempts to escalate privileges on the service processor

◆

Symmetrix Access Control violations 

◆

Removal of physical drives

◆

Successful disk erasure events

◆

Unsuccessful disk erasure events

◆

Start of a remote file transfer between the customer environment 
and EMC Service personnel

This integration is available with RSA enVision v3.5 and either 
DMX-3 or DMX-4 systems running Enginuity 5772 and higher.

EMC Certified Data 
Erasure for 
Symmetrix Disks

Data Erasure erases data on a physical medium where the granularity 
is an entire physical drive. The erasure can vary between a single pass 
write of data to the drive, all the way to multi pass erasure using 
complex algorithms as used in DoD 5220.22-M. The intent of secure 
disk erase is to remove all recoverable user data from a given physical 
drive, or report that the attempt to remove the data was unsuccessful.

Running Data Erasure

Upon purchase of the EMC Certified Data Erasure for Symmetrix 
Disks licence, a configuration change will be executed by the CE at 
time of installation, or at a later time, to enable this feature. The EMC 
Certified Data Erasure for Symmetrix Disks licence will enable the 
following functions to be performed. Data Erasure will commence on 
the “Not Ready” spare automatically, as long as sufficient numbers of 
permanent spares exist.

Provided the secure disk erase completes successfully, this process 
will allow a single CE visit to replace a failed drive with a new drive 
and return the failed drive EMC. The customer may then reference 
the audit log for evidence and proof of successful Data Erasure.

Note: 

The EMC Certified Data Erasure for Symmetrix Disks software 

requires that the customers purchase a supporting service that includes the 
ability to retain drives that cannot be erased.

Содержание Symmetrix DMX-3







































































































































































































































































































































Отзывы:

Нет отзывов