Installation & Operating Instructions
EMC-DMA-2.0
Energy Management Consultants, 1550 La Follette Street, Fennimore, WI 53809
Tel. +1-608-822-3550 • Fax +1-608-822-3847 • E-mail: [email protected] • Web: www.emccontrols.com
Specifications subject to change without notice.
rev. 04/15/19
43273_ins_DMA_2.0
1 of 4
Product Identification and Overview
Specifications
Fig. 2:
DMA-2.0
Mounting Diagram
The DMA-2.0 is a door monitor assembly that monitors a
door switch. Green, amber, and red LEDS on the face of
the unit indicate whether the door is closed, open, or has
exceeded its user-selectable open time period.
Leaving the door open for more than the user-selected time
will also energize a buzzer to alert personnel nearby that the
door should be closed immediately. The unit also contains
two auxiliary relays that will energize whenever the door is
opened to alert other user-supplied warning devices or a
building automation system.
A green LED inside the unit illuminates whenever power is
present and red LEDs illuminate when the auxiliary relays
are energized to assist with installation and troubleshooting.
The unit is powered by 24 VAC or 24 VDC.
Supply Power:
24 VAC or 24 VDC (UL Listed Class 2 Power Source only)
Power Consumption (max):
7.5 VA @ 24 VAC, 200 mA @ 24 VDC
Auxiliary Relay Contact Rating:
1.0 Amp @ 30V AC/DC
Wire Size:
14 to 22 AWG
Door Switch:
Normally closed (NC)
Environmental Operation Range:
Temp: 0° to 60°C (32 to 140°F)
Humidity: 5% to 95% RH non-condensing
Mounting
Fig. 1:
DMA-2.0 Unit
