EMC Celerra, Справочник по командам

Страница: 320 / 522

320
Celerra Network Server Command Reference Manual
The server Commands
CAUTION
!
Before adding or changing a security mode, CIFS service must be
stopped using server_setup, then restarted once options have been
set.
[,dialect=<dialect_name>]
Specifies a dialect. Optimum dialects are assigned by default.
Options include CORE, COREPLUS, LANMAN1 (default for
UNIX and SHARE security modes), LANMAN2, and NT1
(default for NT security mode).
-add wins= <ip_addr>[,wins=<ip_addr>...]
Adds the WINS server(s) to the CIFS configuration. The list of WINS
servers is processed in the order in which they are added. The first
one is the preferred WINS server. If after 1500 milliseconds, the first
WINS server times out, the next WINS server on the list is used.
-add usrmapper= <ip_addr>[,usrmapper=<ip_addr>...]
Adds the IP address(es) of an External Usermapper host(s) to the
CIFS configuration. A single IP address can point to a primary or
secondary Usermapper host. If you are using distributed
Usermappers, up to 8 subsequent IP addresses can point to
secondary Usermapper hosts.
-delete standalone= <netbios_name>
Deletes the standalone CIFS configuration as identified by its
NetBIOS name.
-Disable <interface> [<interface>,...]
Disables the specified IP interface(s) for CIFS service. Interface names
are case sensitive. All unused interfaces should be disabled.
-Enable <interface> [<interface>,...]
Enables the specified IP interface(s) for CIFS service. Interface names
are case sensitive.
-delete netbios= <netbios_name>[,alias=<alias_name>...]
Deletes the CIFS configuration as identified by its NetBIOS name. If
an alias has been specified, deletes the alias name for the NetBIOS
name.
-delete compname= <comp_name>[,alias=<alias_name>...]
Deletes the CIFS configuration as identified by its <comp_name>.
This does not remove the account from the Active Directory. It is
recommended that an -Unjoin be executed prior to deleting the
computer name.