EMC Celerra, Справочник по командам

Страница: 218 / 522

218
Celerra Network Server Command Reference Manual
The nas Commands
OPTIONS -edit [-user | -group] {-mover <movername> | -fs <fs_name>
[-path <pathname>]} [<id> [<id> ...]
Sets the quota limits for users or groups on a specified Data Mover,
mounted file system, or directory tree.
For a user, the ID can be a UID, however, if NIS or the local password
file on the Data Mover is available, a username can also be used.
For a group, the ID can be a GID, however, if NIS or the local
password file is available, a group name can also be used.
Upon execution, a vi session (unless the EDITOR environment
variable specifies otherwise) is opened to edit the quota configuration
file. Changes to the file are applied when the vi session is saved and
exited.
[-proto <proto_id>] | [-block <hard_limit>[:<soft_limit>]]
Applies the quota configuration defined for the prototype user
for each specified ID, and sets a hard and soft limit for storage
(block) usage in kilobytes.
[-inode <hard_limit>[:<soft_limit>]] [<id> [<id>...]
[-block <hard_limit>[:<soft_limit>]]
Edits the inode (file count) limits and the block (storage in KBs)
limits directly into the quota configuration file without opening
an editing session.
-edit -config {-mover <movername> | -fs <fs_name>}
[-path <pathname>]}
Edits the default quota configuration for all users/groups currently
without quotas or subsequently added to the specified Data Mover or
file system or quota tree. Also edits the grace periods for soft quotas,
and the conditions upon which to generate a quotas-event message to
the system log.
[-option <options>]
Specifies the following comma-separated options:
BGP= <integer>
Sets the block grace period in seconds.
IGP= <integer>
Sets the inode grace period in seconds.
DUBSL= <integer>
Sets the default user block soft limit in KB.
DUBHL= <integer>
Sets the default user block hard limit in KB.