EMC Avamar 6.1, Руководство пользователя

Страница: 22 / 106

22
EMC Avamar 6.1 for VMware User Guide
Configuration and Setup
Note: This URL must be a secure (HTTPS) web address.
The vSphere Welcome page appears.
2. Click Download vSphere Client.
Your browser might prompt you to either open the file “in-place” (on the server) or
save it to your local computer. Either method is acceptable. However, if you save the
file to your local computer, you must open (double-click) that installation file to
continue with this procedure.
3. Either open the installation file in place (on the server), or double-click the
downloaded installation file.
The installation wizard appears.
4. Follow the on-screen instructions.
5. When prompted, click Finish to complete the installation procedure.
The installation wizard closes.
Download and install Avamar Administrator software
If you have not already done so, download and install Avamar Administrator software by
performing the following:
1. From a Windows computer, point your web browser at the Avamar server by typing the
following URL:
http://AVAMARSERVER
where AVAMARSERVER is your actual Avamar server network hostname as defined in
DNS, or IP address.
You will be automatically redirected to the Avamar secure web server.
Depending on your browser security settings, a security alert dialog box might appear.
2. If a security alert dialog box appears, click Yes, or OK to allow redirection to the
Avamar secure web server.
The Secure Log On page appears.
3. Page down until the Documents and Downloads link is visible.
4. Click Documents and Downloads.
The Documents and Downloads page appears.
5. Page down until the Windows for x86 (32 bit) section is visible.
6. Click the Microsoft Windows XP, 2003, Vista, 2008, 7 link.
The Downloads for Microsoft Windows XP, 2003, Vista, 2008, 7 page appears.
7. Click the AvamarConsoleMultiple install package.