Using existing screw, attach transformer
to the power outlet
.
C
onnect
+
Installation
Instructions
Unpack the System
Each component will be labeled with the
location in your home
Select a Panel Location: Tips
Find a location for the
Connect
+
panel with a power
source and at least one network connection. Install
Connect
+
centrally on the main floor. Avoid
mounting near air ducts, appliances, or other large
metal objects. Put some space between
Connect
+
and the home router.
Connect
+
includes a 6-foot
cable for this purpose.
Attach the base station to
the panel
.
Connect one end of the Ethernet
cable to your home router.
Disregard if using cellular communication.
Connect the other end of
the Ethernet cable
to the port on .
Install Door Sensors: Tips
Before installing the door sensor, check that it will make
the keypad chime when you place the magnet next to the
sensor and then remove it. Verify the location of the
sensor by looking for the sticker on it. Check the
placement of the sensor on the door or window before
mounting it to ensure it will function properly. Ensure
sensor is placed on the non-hinged side of the door
The current user code is 1234. Please refer to your email for further instructions.
Visit
emcsecurity.com/
connect-plus-installation
for a video tutorial
page 1
Set Up the Control Panel
Install Sensors
Connect to Power
On an available outlet plug,
unscrew faceplate screw, avoid
switched outlets.
Connect the
power connector
to
Connect
+
and thread the cable through
the strain relief peg.