2. Connecting the Hardware
Remove visible components from their packaging:
•
InSight
™
Adapters (ISA3s)
•
EM357 Sample Chips
•
EM35x Breakout Boards
•
EM35x Modules
•
Data Emulation Interface (DEI) Cables
•
Ember Happy Fun Ball
•
InSight Port (ISP) Cables
•
Radio Frequency Cable
Place all components on a clean, dry surface.
1. Unpacking the Contents
Power over Ethernet (PoE) Switch
1.
Remove PoE Switch from box.
2.
Connect AC Power Supply and insert it into
a wall outlet. If needed, use an AC Plug
Power Adapter.
InSight Adapters (ISA3s)
1.
Insert one end of Ethernet Cable (red)
into Ethernet port of InSight Adapter (ISA3).
EM35x Breakout Boards
One InSight Port (ISP) Cable and one Data Emulation
Interface (DEI) Cable are used to connect one ISA3
to one EM35x Breakout Board. One ISA3 is powering
one EM35x Breakout Board.
1.
Insert one end of ISP Cable
into InSight Port of ISA3.
2.
Insert one end of DEI Cable into
DEI Port of ISA3.
3.
Attach other end of ISP Cable
to InSight Port on EM35x
Breakout Board.
4.
Attach other end of DEI Cable
to DEI Port on EM35x
Breakout Board.
5.
Repeat steps
1–4
for the two other ISA3s
and two EM35x Breakout Boards. This completes
the ISA3-to-EM35x Breakout Board setup.
Corporate Network
Connect customer-supplied Ethernet
Cable to PoE Port 8 of PoE Switch and
either
a corporate network (using static
or DHCP addresses)
or
to a developer’s
PC (must use static IP addresses).
4.
Repeat steps
1–3
for the two other
ISA3s and PoE Ports 2 and 3. This
completes the ISA3-to-PoE Switch setup.
3.
Insert other end of Ethernet Cable into
Port 1 of PoE Switch.
2.
Confirm the toggle switch
is set to ‘INT’ position.
A
A
Remove seal on EM35x Module Box. Count six
EM35x Modules. Set EM35x Module Box aside.
B
B
Remove USB Power Supplies with Adapters
and PoE Switch.
C
Remove
Quick Start Guide
, InSight Dekstop (ISD)
CD, IAR Embedded Workbench CD,
US-to-multinational AC Plug Power Adapter Kit,
AAA Battery Packs, Ethernet Cables, and USB
Cables. Set them aside.
D
C
D
DEI Cable
Ethernet Cables
Ethernet Cable
(not included)
PC
Power Supply
PoE Switch
ISP Cable
EM35x Module
x 6
InSight Adapter (ISA3)
x 3
InSight Port (ISP) Cable
x 3
EM35x Breakout Board
x 3
EM35x Module
x 3
Data Emulation Interface
(DEI) Cable
x 3
Ember Happy Fun Ball
x 1
EM357 Sample Chip
x10
EM35x Module Box
PoE Switch with Power Supply
x 1
Radio Frequency Cable
x 1
USB Power Supply with Adapters
x 3
Quick Start Guide
InSight Desktop (ISD) CD
IAR Embedded Workbench CD
x 1
Ethernet Cable
x 3
AAA Battery Pack
(batteries not included)
x 3
US-to-multinational
AC Plug Power Adapter Kit
x 1
USB Cable
x 3
3
Corporate
Network
ATTENTION: Observe precautions for handling
electrostatic sensitive devices.