cod: Veronte-4-HUM.docx
pag: 17/20
Veronte is compatible with standard Pulse Positon Modulation (PPM) signals, Futaba radios
between 8 and 12 channels are recommended.
Figure 10: Futaba T10 Joystick
Figure 11: PPM Signal
As default, channel 8 is reserved for manual / auto switch. High level is used for automatic
flight and low level for manual control. This channel can be configured on Veronte Pipe.
Caution!!
PPM signal must be into the Veronte voltage ranges. Some joysticks
may need an adaptation board, please ask our team to check compatibility.
Veronte connector for CS is provided with 3.5mm stereo plug connector as follows:
Figure 12: PPM connector