v1.2 © 2014 Embelin Ltd. , all rights reserved
INSTALLER GUIDE
PARTS OF INSTALLATION
REMUC-2-AC controller
External antenna
Cables needed for installation
GPS/GLONASS receiver (only Remuc PLUS)
Illuminated usage button
ELECTRICAL FEATURES
Operating voltage
+9V...32V
Operating temperature
-30...+80C
Current consumption on stand-by
< 30mA (12V)
Operating range of the heat sensor
-55...+125C
IMPORTANT INFORMATION
WARNING!
Familiarize yourself with usage, service and safety instructions supplied with
the device that is controlled using REMUC.
CONTROLLER MUST BE INSTALLED SO THAT THE INSTALLATION NEVER
EXCEEDS GIVEN VOLTAGE AND CURRENT INPUT LIMITS. CURRENT INPUT MUST
BE GUARDED WITH A 5A FUSE
PIN code for the SIM card must be one of the following: ”1234”, ”0000” or the PIN code
query must be disabled completely
If any other SIM card is used than the one included in the package, SIM card functionality
must be verified with a mobile phone before installation.
CONNECTING REMUC USAGE BUTTON
Installer should proceed with caution when
assembling usage button connector. Wire contact
going in the plug must be in correct orientation and
of correct color, otherwise breakage may occur.
