em@x
24
NOTICE
1.
When you move the appliance, hold it at its base and lift it carefully. Keep the
appliance in an upright position.
2.
Never use the door for moving the appliance as you will damage the hinges.
3.
The appliance must be transported and installed by at least
two persons
.
4.
When you unpack the appliance, you should take note of the position of every
part of the interior accessories in case you have to repack and transport it at a
later point of time.
5.
Do not operate the appliance unless all components are installed properly.
6.
Do not stand or lean on the base, the drawers, the doors etc. of the appliance.
7.
The ventilation openings of the appliance or its built-in structure (if the
appliance is suitable for being built-in) must be completely open, unblocked and
free of any kind of dirt.
8.
Do not put any heavy items onto the open door of the oven. Do not put any
cookware onto the open door of the oven. Do not lean against the open door
of the oven as you will damage the hinges.
2. Installation
2.1 Unpacking and positioning
1.
Unpack the appliance carefully. Dispose of the packaging as described in
chapter
WASTE MANAGEMENT
.
2.
The accessories of the appliance may be equipped with transport protections.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport protection.
3.
Check that the appliance and the power cord are not visible damaged.
4.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
5.
Install the appliance on a
level, dry and solid floor
. Check the correct
installation with a bubble level.
6.
The nameplate is inside the appliance or at the back.
