1
4
PART LIST
WATER DESCENT CONTROL BOX
Model: WTD-CB
Keep this manual safe for future reference
APPLICABLE FOR EMAUX WATER DESCENTS:
PB300-25(L)/PB600-25(L)/PB900-25(L)/PB1200-25(L)
PB300-150(L)/PB600-150(L)/PB900-150(L)/PB1200-150(L)
PB300-230(L)/PB600-230(L)/PB900-230(L)/PB1200-230(L)
Warning:
This electrical control box must be installed by a licensed or certified electrician or a
qualified serviceman in accordance to the requirements of your government
standard or local authorities. Improper installation will create electric hazards which
could result in serious injury, death as well as damage to the property.
CUT THE POWER BEFORE SERVICE AND MAINTAINANCE!
INSTALLATION EXPLAIN
1) Remove the Panel from the Control Box, position the box to the desired fitting
place and mark on the wall with the location of the drilled holes, then drill 4 holes
of ø8mm on the marked position and insert a plastic fitting, secure the box by
fastening 4 screws of M5x35 to the plastic fittings(See diagram below).
2) Feed the LED lights Cable through the cable gland(s) and connect the cable as
shown in the Control Box Wiring Diagram. Reassemble the panel cover and
secure the Panel by fastening 4 screws of M4x12.
3) If multiple Water Descents are being installed, the pre-set holes on the side of the
Control Box can be used.
CONTROL BOX INSTALLATION DIAGRAM
SPECIFICATIONS
Working Temperature
Input
Output
-20~+40
?
AC 100-240V; 50/60Hz
DC 12V, 60W
Frequency RF
433MHz
M5×35 Self-
Tapping Screw
M5×35
Control Box
Plastic Fitting
Wall
1
2
3
4
5
6
7
8
9
10
11
12
13
EMCB15112505
Item
No
.
Part
No
.
Product
Description
QTY
1
03011007
M4×12
Screws
8
2
04014054
Lighted
Switch
1
3
01360015
Panel
Board
1
4
03011196
M3×6
Screws
5
5
03011023
M5×35
Screws
4
6
04014013
Cable
Gland
4
7
87013019
Plastic
Fitting
4
8
89480103
Remote
control
with
Battery
1
9
04014094
Control
Panel
Cover
1
10
04014095
Control
Panel
1
11
04012082
Transformer
with
Wiring
Cap
1
12
89480101
Control
Box
1
13
89480102
Cable
with
Wiring
Cap
1
