FILTER MAX SERIES
PARTS FOR FILTER MAX FILTER
MODEL: MFS17 / MFS20 / MFS24 / MFS27A / MFS27 /
MFS31A / MFS31 / MFS35
1-4
4-4
EMFI16030555
Your Emaux “Filter Max” Filter is a high performance corrosion-proof filter that has superior flow characteristics that is with the
ease of operation. Everything is made simple from installation, operation to the maintenance of the filter. Your “Filter Max”
filter will be your pool filtration partner that provides clear water with the least maintenance hassle and care.
WARNING:
BEFORE INSTALLATION BE SURE TO READ ALL INSTRUCTIONS AND WARNINGS
CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
HOW IT WORKS
The Filter uses special sand to remove dirt particles from pool water. Filter sand is loaded into the filter tank to
act as the filtration media. The pool water which contains dirt particles is pumped through your piping system to
the filter via the filter control valve. As pool water passes through the filter, dirt particles will be caught by the
sand bed and filtered out. The cleaned pool water is returned from the bottom of the Filter Tank, through the
control valve and back to the pool through your piping system. The entire process is continuous and automatic.
It is this process that provides the filtration and circulation of water in your pool.
With the filtration process, dirt will accumulate and becomes saturated in the filter tank. Pressure in the tank will
increase and the resistance of water flow will occur. This means it is time to clean (backwash) your filter.
Another indication to know when to clean (backwash) the filter is by checking the pressure gauge reading.
Backwash operation should be performed when the pressure increases by 10psi above the pressure when it was
clean. Typically a clean filter will run at 10 to 15psi, so take note of the pressure gauge reading when the filter
was installed. When the pressure reaches approximately 20 to 25psi or 50% increase from the clean reading,
proceed to the Backwash operation.
WARNING:
turn off the pump before switching the control valve handle.
To perform the Backwash operation, position the handle on the control valve to “Backwash”, the water flow is
automatically reversed through the filter so the water is directed from the bottom of the tank, up through the
sand, flushing the trapped dirt and debris
out of the waste line. The duration of the backwash operation will depends on how dirty your filter is. Check the
sight glass to see when the water becomes clear. It is recommended that the backwash should be at least 2
minutes long.
Once the backwash operation had been completed, the filter should go through the process of “Rinse” and
then back to “Filter”. To perform the different operations, position the handle on the control valve as indicated.
MFS17
MFS27
,
MFS31A
,
MFS31
,
MFS35
,
MFS20
,
MFS24
,
MFS27A
1. Place on tank
opening.
2. Add water to
cover laterals
and add sand.
INSTALLATION
Installation had been made simple, the only tools needed is a
screwdriver and pipe sealant for plastic.
The filter should be installed as close to the pool as possible, but
keep a distance of at least 5 feet (1.5m). Locate the Filter on rigid,
level surface, preferably in a dry, shaded, and well-ventilated
area. Prior to installation give consideration to the following:
Position of suction, return, and waste connections. Access for
backwashing operation and servicing; protection from sun, rain,
splashing, etc; Drainage of filter room; Ventilation and protection
of the motor.
1)Fill the tank with water to the level that covers the laterals
(crepinas), or about 1/3 of the tank height is recommended.
This will avoid damages to the laterals (crepinas) by the force
of the sand when pouring into the filter.
80g
印尼蓝
普通印刷
2016.03
1 : 1
420X297(mm)
EMFI16030555
PANTONE Process Black C
材
料
工 艺
日 期
EMAUX MFS
系列 侧出麦仕胶缸 英文说明书
名 称
版 本 编 号
规 格
比 例
颜 色
产品负责人
更改日期
更改内容
零部件清单
版本
制图/设计
D
意 万 仕(中
山)泳
池 设 备 有 限 公 司
E M A U X Z h o n g S h a n ) S w i m m i n g P o o l E q u i p m e n t C o . , L t d
(
审核
批准
Key No.
Part No.
Description
Qty
1
89010701
Air Release Valve with Oring
1
2
06021013
Plastic Pressure Gauge with O-ring
1
3
01201022
Lid (Transparent)
1
4
03021035
M6 Nut
1
5
89012512
Clamp Kit
1
6
01111101
Star-Shaped Nut
1
7
02010007
O-Ring
1
8
03011166
M6×110mm Screws
1
9
89012606
Filter Tank for MFS17
1
9
89012607
Filter Tank for MFS20
1
9
89012608
Filter Tank for MFS24
1
9
89012609
Filter Tank for MFS27A
1
9
89012620
Filter Tank for MFS27
1
9
89012610
Filter Tank for MFS31A
1
9
89012621
Filter Tank for MFS31
1
9
89012622
Filter Tank for MFS35
1
10
02011003
O-Ring for 1.5" adaptor
2
10
02020016
O-Ring for Connector
2
11
88280811B
6 Way 1.5" Valve with Piping Kit, 1.5" union set x 3 and pressure gauge (Black)
1
11
88280812B
6 Way 2" Valve with Piping Kit, 2" union set x 3 and pressure gauge (Black)
1
12
89012601
The Inner Tank System for MFS17
1
12
89012602
The Inner Tank System for MFS20
1
12
89012603
The Inner Tank System for MFS24
1
12
89012604
The Inner Tank System for MFS27A
1
12
89012605
The Inner Tank System for MFS31A
1
12
89012617
The Inner Tank System for MFS27
1
12
89012618
The Inner Tank System for MFS31
1
12
89012619
The Inner Tank System for MFS35
1
13*
01172007
Laterals(115mm)
*
13*
01172008
Laterals (126mm)
*
13*
01172010
Laterals (185mm)
*
14
01111059
16-21inch Filter Base
1
14
01111062
21-28inch Filter Base
1
14
01112037
31-35inch Filter Base
1
15
89011601
Water Drain Set
1
Notes:13* MFS17/ MFS20 should have 8pcs of lateral (115mm)
13* MFS24/ MFS27A/ MFS31A should have 8pcs of lateral (126mm)
13* MFS27/ MFS31/ MFS35 should have 4 pcs of lateral (115mm) and 4pcs of lateral (185mm)
