Note for installation
1) Select the light color according to your personal preference
(cool white, warm white, single blue, RGB)
2) E-Fusion is suitable for ground landscape such as yard, square
etc. You can select the type of the light depending on your
needs.
3) The length of the light cable is 0.5 meter. If wires are
connected under water, you must use waterproof tape or
other method to seal the connection point.
4) (Prior to installing the light fixture, the whole circuit system
diagram should be finished by professional designer. )
5) The circuit system must comply with local laws and regulations
and must be carried out byqualified electricians.
6) Make sure the voltage is 12V.
Installation of the light
1 Embed the light encasing in the ground first, make sure the
surface of the face plate is flush with ground surface (See
Figure 1).
2) Pull the cable through the encasing. Leave extra cable in the
encasing for sevicing. (See Figure 1)
3) Install the light into the encasing, connect the cable and
secure the face plate in place. (See Figure 1)
)
Maintenance of the Lights
1)
2) This unit does not need any kind of maintenance. If it is not
working properly, please contact EMAUX authorized dealer
where you purchase the unit from.
3) Warranty will be voided if the Emaux Underwater Light was
dismantled by unauthorized personnel.
Before switching on the lights, check whether the lights are
fully submerged underwater and the circuit boxes are running
properly.
2-2
Figure 1