STEP 1
1. Take the seat out of the box
2. Take the backrest out of the box
3. Remove headrest, gaslift, base, casters, screws (1,4,5,6,7)
STEP 3
1. Insert 5pcs of
casters into the
base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 4
1. Fasten
headrest to
the backrest
STEP 2
1. Fasten backrest to
the mechanism
2. Tighten the screws
A- 3 pcs to a metal
plate which attaches to
the lower part of the
backrest
User guide
Maintenance and attention
1. The chair can only be used by
one person at a time.
2. Do not use the chair as a stool
or ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair untill all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. For professional servis, please
contact us by phone +420 463 034
155, or by mail
[email protected]
7. Screws
Model TAU
A
M8x40
3 pcs Backrest
1 pcs
IMBUS
Assembly instructions
–
model TAU
www.emagra.cz/cs/m-391-kancelarska-zidle-tau
Used parts
(Note: Some parts may be different than images)
1. Headrest
2. Backrest
3. Seat+mearmrests
4. Base
5. Gaslift
6. Casters
c) Slide
down
d) Finished
a) Put on b) Click in
