STEP 1
1. Insert armrests to the seat
2. Be aware of the correct position of the
left and right armrests
3. Fasten the screws Cx4pcs for
armrest K13
, or Ax6pcs for
3B armrests
STEP 4
1. Insert 5pcs of
casters into the
base, then
insert gaslift
into the
opening in the
base
2. Insert the
gaslift into the
corresponding
hole in the
mechanism
STEP 2
1. Fasten mechanism to the seat
2. Tighten the screws A x 4pcs
STEP 5
1. Fasten
headrest to
the
backrest
2. Tighten
the screws
D x 2pcs
STEP 3
1. Fasten backrest to
the mechanism
2. Tighten the screws B
x 3pcs
User guide
Maintenance and attention
1. The chair can only be used by
one person at a time.
2. Do not use the chair as a stool
or ladder.
3.Do not use the chair unless all
parts are properly assembled.
4.Do not use the chair unless all
screws are properly tightened.
5. If the chair is damaged by
external influences, do not use it
without expert repair.
6. This is a mechanical product
subjects to user stress, it is
necessary to check the chair
regularly and possibly tighten the
screws.
For professional servis, please
contact us by phone +420 463 034
155 or by mail [email protected]
9. Screws
Model M1 / armrests K13
A
M6x30
6 pcs 2 pcs ar 4 pcs mechanism
B
M8x14
3 pcs Backrest
C
M6x35
4 pcs Armrests
D
M5x20
2 pcs Headrest
Model M1 / armrests 3B
A
M6x30
10
pcs
6 pcs ar 4 pcs mechanism
B
M8x14
3 pcs Backrest
D
M5x20
2 pcs Headrest
1 pcs
IMBUS
Assembly instructions - model M1 with seat depth regulation
Used parts
(Note: Some parts may be different than images)
1. Gaslift
2. Casters
3. Armrests
4. Synchro mechanism
5. Seat
6. Base
7. Backrest
8. Headrest
