STEP 1
1.
Take the seat out of the box
2.
Take the backrest out of the box
3.
Remove headrest, gaslift, base, casters, screws (3,4,5,6)
STEP 3
1. Insert 5pcs of casters
into the base, then insert
gaslift into the opening
in the base
2. Insert the gaslift into
the corresponding hole
in the mechanism
STEP 2
1. Fasten backrest to
the mechanism
2. Tighten the screws
A- 3 pcs
User guide
Maintenance and attention
1. The chair can only be used by one
person at a time.
2. Do not use the chair as a stool or
ladder.
3.Do not use the chair unless all parts are
properly assembled.
4.Do not use the chair untill all screws are
properly tightened.
5. If the chair is damaged by external
influences, do not use it without expert
repair.
6. For professional servis, please contact
us by phone +420 463 034 155, or by mail
[email protected]
6. Screws
Model Athena
A
M8x14 3 pcs Backrest
1 pcs
IMBUS
Assembly instructions
–
model ATHENA
www.emagra.cz/cs/m-386-kancelarska-zidle-athena-b
Used parts
(Note: Some parts may be different than images)
1. Backrest
2. Seat + mec
armrests
3. Gaslift
4. Base
5. Casters
