D01-501106-01 Rev B
DSVGA Design Reference Board Manual
6
5. USING THE DSVGA DESIGN REFERENCE BOARD
SOFTWARE
The DSVGA Design Reference Board includes a support software suite with the
following functionality.
Perform software microdisplay brightness adjustments
Download and install new versions of the DSVGA Design Reference Board
firmware to update or provide new functionality using an USB (RS-232)
connection
Read/write register values to the microdisplay to control various
characteristics (see your microdisplay’s User Specification for more
information)
DSVGA Design Reference Board Software Utility
1.
Connect the USB cable to the DSVGA Design Reference Board
2.
Connect the video source to the DSVGA Design Reference Board
3.
Turn on the DSVGA Design Reference Board
4.
Check under the PC’s “Device Manager” window to determine serial COM
PORT number as shown below:
5.
Start the
DSVGA_SW_V1_1.exe
application, enter the correct COM Port
number and a screen should appear like that shown below:
