Emagic Emi 2/6 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 66

Emagic Emi 2/6 Скачать руководство пользователя страница 56

56

Troubleshooting

Emagic

EMI 2|6

10 Troubleshooting

The blue power LED is not lit

•

If you use the EMI 2|6 with an external power supply, the
power supply must match the specifications outlined in the
External Power Supply section from page 11 onwards. A suit-
able high-quality power supply for the EMI 2|6 is available
from Emagic.

•

If other devices are already connected to the USB port, the
addition of the EMI 2|6 may overload the power supply of
the bus. If this occurs, please remove one or more of the
other devices, or connect them to a self-powered hub (i.e.—
a hub with its own power supply).

•

If the USB power supply is insufficient for use with the
EMI 2|6 (which may be the case with some laptop compu-
ters), only use the Emagic-supplied external power supply
for the EMI 2|6.

The blue power LED is lit but the green status LEDs
are not

•

It is possible that the EMI 2|6 drivers are not installed or not
correctly installed. Please repeat the installation process
using your driver installation CD. Restart the computer.

•

During restart the drivers are not active. This means that the
green status LEDs will only be illuminated after the operat-
ing system is completely booted.

•

It is also possible that the EMI 2|6 has not been correctly
initialized—in this situation the green status LEDs will
remain unlit. Please disconnect the EMI 2|6, wait for a few
seconds and then reconnect it.

«
...
54
55
56
57
58
...
»

Содержание Emi 2/6



































































Отзывы:

Нет отзывов