1 PCI-6871 Startup Manual
PCI-6871 PCI Eden400/Eden667 SlotPC SODIMM/VGA/
LCD/LVDS/8139/CFC2
Startup Manual
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCI-6871 all-in-one single board computer
• 1 startup manual
• CD-ROM or disks for utility, drivers, and manual (in PDF for-
mat)
• 1 power cable p/n: 1703080101
• 1 PS/2 KB/M cable p/n : 1700060202
• 1 Printer cable p/n :1700260250
• 1 FDD cable p/n :1701340603
• 1 EIDE cable p/n :1701400452
If any of these items are missing or damaged, contact your dis-
tributor or sales representative immediately.
Note: For detailed contents of the PCI-6871, please refer to the
enclosed CD-ROM or disk (in PDF format).
•
CPU:
VIA Eden 400MHz (PCI-6871F-J0A1)
VIA Eden 677 MHz (PCI-6871F-M0A1)
•
System chipset:
VIA VT8606"TwisterT"+VT82C686B
•
BIOS:
Award 256 KB Flash memory
•
System memory:
Two 144-pin SODIMM socket (on the
backside), accept 32 MB~1024MB, (512MBx2) SDRAM
•
2nd cache memory:
64 KB on the processor
•
Enhanced IDE interface:
Supports two Enhanced IDE chan-
nels. Primary Channel supports ATA-100 mode; secondary
Channel only supports ATA-33 and PIO mode. CFC card
occupies secondary slave.
•
FDD interface:
Supports up to two FDDs
•
Serial ports:
Two serial RS-232 ports. COM1:RS-
232,COM2:RS-232/422/485
For more information on this and other
EMAC
products, please visit our website at:
ht t p :/ /w ww.
emacinc
. co m
This manual is for the PCI-6871 series, Rev. A1.
Part No. 200K687100
2nd Edition
Printed in Taiwan
May, 2004
•
Parallel port:
One parallel port, supports SPP/EPP/ECP
mode
•
Keyboard/mouse connector:
Supports standard PC/AT key-
board and a PS/2 mouse
•
Power management:
Supports power saving modes includ-
ing Normal/Standby/Suspend modes. APM 1.2 compliant
•
Watchdog timer:
62 level timer intervals
•
USB:
Four universal serial bus ports
•
PC/104 expansion:
PC/104 connector for ISA and PCI con-
trol board
Solid State Disk
• Supports one 50-pin socket for CFC type I/II
VGA/LCD Interface
•
Chipset:
VIA VT8606"TwisterT" chip with integrated
Savage4 2D/3D/Video Accelerator
•
Frame buffer:
Supports 8/16/32MB frame buffer with sys-
tem memory
•
Interface:
4X AGP VGA/LCD interface: support for 9, 12,
15, 18, 24, 36 bit TFT and optional 16- or 24-bit DSTN panel
•
Display modes:
CRT Modes:
1280 x 1024@16bpp (60 Hz),
1024 x 768 @16bpp (85 Hz),
800 x 600@16bpp(60Hz)
LCD/Simultaneous Modes:
1280 x 1024@16bpp (60Hz)
1024 x 768 @16bpp (60Hz)
LVDS:
Supports 2-channel (2x18bit)LVDS interface
Ethernet interface
•
Chipset:
RTL 8139C
•
Ethernet interface:
IEEE 802.3u 10/100BASE-T Fast Ether-
net compatible
• I/O address switchless setting
Mechanical and Environmental
•
Dimensions (L x W):
146 x 105 mm (5.75” x 4.13”)
•
Power supply voltage:
+5 V, +12 V ± 5%
•
Power requirements:
Max: 10.33A @ +5V, 205mA@+12V (with 128 MB SDRAM,
VIA C3-400MHz CPU)
Typical:2.37A @ +5V, 34.02mA@+12V (with 256 MB SDRAM,
VIA C3-400MHz CPU)
•
Operating temperature:
0 ~ 60°C (32 ~ 140°F)
•
Weight:
0.27 kg (weight of total package)
Packing List
Specifications
PCI-6871 PCIEden400 SlotPC
SODIMM/VGA/LCD/L
V
DS/8139/CFC2
