USER MANUAL - 2020
27
8. Battery Charging Procedure
The procedure for charging the vehicle being meticulous, it is
important to be familiar with this procedure before the first charge
of the battery.
The battery must be charged over a temperature range from 0°C to
40°C.
Due to the strong current involved, electrical arcs may occur
when connecting the connector to the battery.
Use only the charger supplied with the motorcycle to charge the
battery. This charger is designed to operate only with a lithium
polymer battery.
Always place the charger on a flat, solid surface in a dry, ventilated
area.
Never cover the charger while charging the battery, otherwise it
may interfere with its ventilation and cause the charger to overheat.
Charging Procedure for 10A, 15A and 25A chargers
-
Stop and switch off the motorcycle (
9.5).
-
Plug the charger on the wall plug.
-
Only for 25A charger, swtich on the switch located on the
back of the charger.
-
Verify that the LED 1 & 2 are like the below picture :
