em-tec BioProTT Clamp-On SL, Руководство пользователя, Страница: 7 / 25

EN
4 General Information Concerning this User Manual
• Read this user manual carefully before starting the system!
• This document is intended for the BioProTT
TM
Clamp-On SL and it describes the use of
the BioProTT
TM
Clamp-On SL.
• The user (= the person who connects the BioProTT
TM
Clamp-On SL to the
tubing circuit and measurement system) is responsible for any risk if the
BioProTT
TM
Clamp-On SL is not connected correctly.
• The customer must ensure that the persons involved in the integration and use of the
BioProTT
TM
Clamp-On SL and the systems it is part of are adequately qualified. In addition,
the information in this user manual must be followed.
Please note:
As the BioProTT
TM
Clamp-On SL is part of a system, the user manual of the evaluation
device must also be taken into account and adhered to.
This user manual contains important information concerning the safe and correct handling of the
BioProTT
TM
Clamp-On SL. Keep it in an easily accessible location and familiarize yourself with all
warning and safety information and observe them. It is the responsibility of the operator (= the
person running and operating the system the BioProTT
TM
Clamp-On SL is part of) to ensure that the
BioProTT
TM
Clamp-On SL is used, inspected and maintained in accordance with the user manual. This also applies
for all subsequent revisions or instructions from the manufacturer. The manufacturer reserves the right to
modify technical data without prior notice.
5 Intended Purpose, Restrictions and Limitations
5.1 Intended Purpose
The BioProTT
TM
Clamp-On SL is indicated for the non-invasive and contactless bi-directional volumetric
measurement of the liquid flowing through tubing systems (in combination with an evaluation device of the
BioProTT
TM
Product Range). The measurement principle is the ultrasonic transit time method.
The BioProTT
TM
Clamp-On SL can be used in applications such as:
• chromatographies
• adding media to bioreactors
• filtration
• fill and finish processes
• filling processes
• process evaluation
• upscaling
• feed control
• research
Additionally, the BioProTT
TM
Clamp-On SL can be used in any processes where liquid flows through a flexible
tubing system at flow rates that lie within the relevant sensor's specification.
For more information regarding applications the BioProTT
TM
Clamp-On SL can be used in, please contact
em-tec GmbH .
BioProTT™ Clamp-On SL
Copyright em-tec GmbH Page 7 D162-704 BioProTT™ Clamp-On SL – User Manual– V4.0
DocuSign Envelope ID: BE88571C-E493-4DFB-AF9A-864EB3FC3D75