ADR4
Installation Manual
EMM_871_4956
Rev 2.8
EM Motorsport Ltd. CONFIDENTIAL PROPRIETARY. All right reserved
3/20
1
Introduction
The EM Motorsport ADR4 system is designed to log data in the event of an accident
at a rate of up to 1KHz and uses inbuilt 3-axis +/-500g accelerometer and 3-axis
gyroscope. The unit also consists of a 10Hz GPS receiver (L1 +SBAS), a battery
backed RTC (Real Time Clock), an internal Flash memory and a rechargeable energy
storage that ensures up to 45 seconds of normal operation in case of power failure.
Built into the front face of the unit is a RGB LED which can be used to recognize
different system situations, such as unit charging, potential incident recorded and other
statuses.
To ensure that your ADR installation complies with all FIA requirements, you are
requested to follow “8872-2018 ADR - Installation specification” available in the FIA
website.
This document serves as an expansion of the aforementioned document, ensuring a
correct installation of the ADR4 to ensure the best performance.
Figure 1
–
ADR 4
