ELZAB Prima 2, Руководство пользователя

Страница: 26 / 32

24
User Manual PRIMA 2 scale ELZAB S.A.
x
When the scale is working in the scales system the scale No. byte takes the following forms:
Scale No. in the scales system Byte No. 22
Scale No. 1 0x0A
Scale No. 2 0x1A
Scale No. 3 0x2A
Scale No. 4 0x3A
6.2.4. Reading of the program version
6.2.4.1. Request
Byte No. 1 2 3 4 5
Symbol ESC M ETX - LF
ASCII (hex) code 0x1B 0x4D 0x03 0x6A 0x0A
x
When the scale is operating in the scales system the bit No. 5 takes the form of:
The scale No. in the scales system Byte No. 5
Scale No. 0 0x0A
Scale No. 1 0x1A
Scale No. 2 0x2A
Scale No. 3 0x3A
6.2.4.2. Response
No. Symbol
ASCII (hex)
code
Description
Example:
version: 1.00
1 TYPE 0x21 The unique device id 0x22
2 VERSION 0x00 .. 0x09 Digit 0 .. 9 0x01
3 NUMBER_H 0x00 .. 0x09 Digit 0 .. 9 0x00
4 NUMBER_L 0x00 .. 0x09 Digit 0 .. 9 0x00
7. Error messages
7.1. Messages and errors displayed on the scale display
Saving the settings after changing the scale configuration.
The scale load exceeds the maximum scale range. Decrease the load.
The scale load is less than -20*e
1
. Reset the scale or power it off and on.
The new article should be placed on the scale because the weighting result of the product
presently placed on the scale has been already sent to the cash register or PC. This message is
displayed only when pressing the key.
Low power voltage of the scale. Error displayed while functioning with voltage less than 4,3 V.
Zeroing or tarring range exceeded. Decrease the load and restart zeroing or tarring.
Zeroing and tarring can’t be effected because of unstable load.
Wrong transmission parameters of the RS232 interface.