Getting started
13
© 2020, Elon Group AB. All rights reserved.
NOTE!
This product and label text are examples. Your product and text may have a different look and content.
Before first use
Calibrate the machine
1.
Make sure the machine is empty.
2.
Plug in the power cord.
3.
Press
to turn on the machine.
4.
Within 10 seconds after the machine was turned on, touch and hold
and
until
t19
is displayed.
5.
Press
.
NOTE! Calibration is completed when the drum stops rotating and digits are displayed.
Run an empty washing cycle
Make sure that the machine is installed and calibrated properly.
1.
Plug in the power cord.
2.
Open the water tap.
3.
Start a washing programme.
NOTE! Do not put any clothes in the machine.
The machine is ready for use when the programme has completed.
