background image

www.elv.com

2  Audio Technology

Versatile

After the great response to the predecessor models 

SUP1 and SUP2, we present the successor, SUP3, which 

has numerous new features. First of all, there is now 

The SUP3 generates a high-quality FM signal including an individually configurable RDS signal. In additi-

on to the analogue audio feed, a USB interface also allows digital audio data to be fed in. The operation is 

clearly arranged via a practical combination of rotary encoder and OLED display; in addition, PC software 

allows easy control of the SUP3 from a PC.

Device short description: 

SUP3

Power supply: 

2x 1,5 V LR6/Mignon/AA

Current consumption: 

250 mA max.

Standby current: 

10 μA

Frequency range: 

87,5–108 MHz

HF-output: 

88–118 dBμV/75 Ω/IEC

Audio-inputs: Audio-/Stereo-audio-jack

Display: 

OLED-colour-display with 128 x 128 pixel

Other:  

Audio optional analog (audio jack) or digital (USB)

 

Station name (2x 8 characters)

 

RDS-text (64 characters)

 

Operation and audio data (digital) via USB

Ambient temperature: 

5 bis 35 °C

Dimensions (W x H x D): 

63 x 142 x 25 mm

Weight (with/without batteries): 

184/135 g

Te

ch

ni

cal

 d

at

a

a digital signal feed via USB. This allows you to use 

a PC or other device with USB sound output directly 

as a signal source. And since the VHF test generator 

can also be operated with batteries and an RDS signal 

to be output can be stored in its EEPROM, you can, 

for example, use the mobile combination of test ge-

nerator and smartphone to put the coveted radio tre-

asure through its paces before buying it, even if, for 

example, VHF reception is not possible in a particu-

lar space. Such a generator is also excellently suited 

for demonstrating radios, whether in the showroom 

or in a museum, as it makes the radio independent of 

antenna reception and also offers the possibility of 

outputting your own content, such as explanations in 

an exhibition.

However, the main purpose of use is probably the 

repair and restoration of VHF radio receivers. An ex-

act calibration is only possible with a test signal that 

conforms to standards. The use as a VHF transmitter, 

however, even if it is only for short distances, is pro-

hibited!

Perfect Signal Supplier

HQ Stereo VHF Test Generator SUP3

2  Audio Technology

Содержание SUP3












Отзывы: