Elu ELU27158, Руководство пользователя

Страница: 8 / 16

6
SAVE THESE INSTRUCTIONS!
MOTOR
Many tools will operate on either D.C., or single phase 25 to 60 cycle A.C.
current and voltage within plus or minus 5 percent of that shown on the
specification plate on the tool. Several models, however, are designed for A.C.
current only. Refer to the specification plate on your tool for proper voltage and
current rating.
Do not operate your tool on a current on which the voltage is not
within correct limits. Do not operate tools rated A.C. only on D.C. current. To do
so may seriously damage the tool.
SYMBOL DEFINITION
V ..........................................volts
A ..........................................amperes
Hz ........................................hertz
W ........................................watts
min ......................................minutes
........................................alternating current
....................................direct current
no ........................................no load speed
........................................Class II Construction
........................................earthing terminal
........................................safety alert symbol
.../min ..................................revolutions per minute