Installation
27
5.2 Removing the front cover
The front covers (top and bottom) must be removed before the Autoloader can be attached to
the analyzer.
The following figure shows the screws on the front covers:
Fig. 12: Removing the front cover
Position
Component
Description
1
Operating side
Operating side of the Autoloader
2
Bottom cover
Bottom cover with space for the crucible bin
2
Position of screws (7×)
Seven screws secure the front cover on the
Autoloader
3
Top cover
Top cover with protective hood
Remove the front cover as follows:
1. Unscrew the screws (
2
) on the front covers (
3
).
2. Remove the top and bottom cover.
The front covers have been removed.
1
3
2
4
