SAVE THESE INSTRUCTIONS - READ ALL INSTRUCTIONS CAREFULLY
WARNING
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION.
• To prevent personal injury or product damage only licensed electricians/personnel should install fixture.
• To avoid electric shock or component damage disconnect power before attempting installation
or servicing.
• This product must be installed in accordance with the National Electric Code (NEC)/Canadian
Electrical Code (CEC) and all applicable Federal, State/Provincial and Local Electric Codes and
Safety Standards.
• Disconnect fixture and allow cooling prior to servicing.
• Any alteration or modification of this product is expressly forbidden as it may cause serious
personal injury, death, property damage and/or product malfunction.
• To prevent product malfunction and/or electrical shock this product must be properly grounded.
CHAIN MOUNT
PENDANT MOUNT
INSTALLATION FOR HBRA-100/HBRA-160
WIRING DIAGRAM
120-277V/0-10V DIM
MOUNTING INSTALLATION INSTRUCTIONS - (SAVE INSTRUCTIONS FOR FUTURE REFERENCE).
CEILING MOUNT
AC/L (BLACK)
DIM+
0-10V
DIM- L-OUT L-IN N-IN
AC/L AC/N
(WHITE)
+(PURPLE)
(GREEN) GROUND
-(GREY)
figure #2
figure #5
figure #1
figure #3
figure #4
120-277V AC Cable
1-10V DIM
figure #6
figure #1
figure #2
figure #3
figure #4
figure #5
1-10V DIM
PURPLE (+)
GREY (-)
N
L
120-277V
AC Cable
figure #6
*Picture shown with 90 degree lens.
Lens sold separately.
Head Office -
1850 Wilson Ave. · Toronto, ON · M9M 1A1 ·
Tel:
416.741.7336 ·
Fax:
416.741.9104
Toll free:
in Canada. 1.800.661.9610 · in USA. 1.888.762.5384 (SOCKETS4U)
www.etlin-daniels.com· For sales/service questions - [email protected]