WOP-2L. User manual
6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 Device description
2.1 Purpose
WOP-2L wireless access point (hereinafter the device) is designed for provision of users' access to high-speed
safe network.
The device provides high-speed and safe wireless network combining a lot of opportunities and services that are
necessary for comfortable users' access to operator services in crowded areas. WOP-2ac provides connection of
up to 40 users.
The device is used to organize wireless network for different climate conditions in the wide range of operation
temperature and high humidity (parks, factories, stadium, etc.) and it is the perfect platform for organization of
connection in cottage settlements and remote communities.
Power supply of the access point is realized by PoE+ technology.
2.2 Device specification
Interfaces:
1 port of Ethernet 10/100/1000 Base-T (RJ-45);
2 SMA-type connectors for external antennas (Omni, sectoral, panel, etc.).
Functions:
WLAN capabilities:
support for IEEE 802.11a/b/g/n/ac standards;
data aggregation, including A-MPDU (Tx /Rx) and A-MSDU (Rx);
WMM-based priorities and packet planning;
subscriber isolation within one VAP;
dynamic frequency selection (DFS);
support for hidden SSID;
8 virtual access points;
third-party access point detection;
spectrum analyzer;
channel autoselection.
Network functions:
autonegotiation of speed, duplex mode and switching between MDI and MDI-X modes;
support for VLAN;
802.1X authentication support;
DHCP client;
GRE;
ACL;
NTP;
Syslog.
QoS functions
priority and profile-based packet scheduling;
bandwidth limitation for each VAP;
bandwidth limitation for each client;
WMM parameters changing.
