WOP-2L. User manual
27
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hardware Version
– device hardware version;
Factory MAC Address
– device WAN interface MAC address, setted by manufacturer;
Serial Number
– device serial number, setted by manufacturer;
Firmware Version
– device firmware version;
Backup Version
– previously installed firmware version;
Boot Version
– device firmware boot version;
System Time
– current time and date, setted in system;
Uptime
– the time since the last turn on or restart the device.
5.5 The 'Radio' menu
In the
'Radio'
menu you can configure the wireless interface.
5.5.1 The 'Radio 2.4 GHz' submenu
In the
'Radio 2.4 GHz'
submenu you can configure the main parameters of the radio interface of the device
operating in the 2.4 GHz band.
Mode
– select interface operation mode:
IEEE 802.11b/g;
IEEE 802.11b/g/n;
IEEE 802.11n.
Auto Channel –
when checked, the device will automatically select the least loaded radio channel for the Wi-
Fi interface. Removing the flag opens the access to install the static operation channel;
Channel
– select channel for data transmission;
Use Limit Channels –
when checked, the access point will use a user-defined list of channels to work in
automatic channel selection mode. If the 'Use Limit Channels' flag is not checked or there are no channels
in the list, the access point will select the operation channel from all available channels in the given band.
2.4 GHz range channels: 1-13;
Channel Bandwidth, MHz
– channel bandwidth, on which the access point operates. The parameter may
take values of 20 and 40 MHz;
