ELTEX WOP-12ac-LR, Быстрое руководство

Страница: 8 / 32

WOP-12ac-LR. Quick guide for FBWA configuration via web interface
8
•
•
•
•
•
•
•
•
•
•
•
•
«Static IP Address» field. Enter the address of the default gateway in the «Default Gateway» field. Changing the
network mask is optional. Click «Update» .
2.6 Radio interface configuration
The access point has 3 radio interfaces that operate in the 5 GHz band.
To configure the radio interface, go to the
«Manage» menu, open the «Wireless Settings» tab and perform the
following:
Country – select settings according to the rules of selected country. Select «Russia» in the list;
Radio Interface – radio interface status:
On – when checked, the radio interface is enabled;
Off – when checked, the radio interface is disabled.
MAC Address —MAC address of the radio interface;
Mode – operating mode of the radio interface;
Channel – channel number for work of wireless network. If you select «Auto», the channel with the least
number of working access points on this channel is automatically determined taking into account the
specified region;
Airtime Fairness – technology of on-air fairness (limits data transfer to clients by equal transmission time):
On – when checked, the technology is enabled;
Off – when checked, the technology is disabled.
Radio1 configuration example:
Radio Interface – check the «On» box;
Mode – select value «IEEE 802.11a/n/ac» .
Before changing the settings, make sure that the managing computer has the access to the access point.
In case of erroneous changes, the settings can be rolled back by resetting the access point to the factory
settings.
