WOP-12ac-LR. Quick guide for FBWA configuration via web interface
27
•
•
•
•
•
•
•
4.5 Line parameters configuration
Go to the
«Line configuration»
tab. Select the first line. Set the flag in the
«Enable»
field. Then, fill in the following
parameters:
Profile
– select SIP profile from the list of available profiles. To configure profiles, use the
«VoIP»
->
«Profiles»
menu;
Phone number
– subscriber number assigned to the telephone port;
User name
– user name associated with this port (shown in Display-Name field of the From header in the
outgoing SIP messages);
Use alternative number
– when selected, an alternative number will be inserted into the
«From»
header of
SIP messages sent from this port (particularly, in order to hide the real number from the Caller ID system of
the callee);
SIP port
– UDP port used to receive incoming SIP messages on the account and to transmit outgoing SIP
messages from the account. It may take values from 1 to 65535 (the default value is 5060);
Calling party category
– enables transmission of outgoing messages in the From header; the latter is
transmitted in Tel-URI format (see RFC3966);
Authentication username and password
– user name and password used for subscriber authentication on
SIP server (and on registration server).
To apply the new configuration, click the
«Apply»
button.
