WEP-2L. User manual
54
Change of operation channel and radio interface power
WEP-2L(root):/#
configure
WEP-2L(config):/#
interface
WEP-2L(config):/interface#
wlan0
WEP-2L(config):/interface/wlan0#
wlan
WEP-2L(config):/interface/wlan0/wlan#
radio-2g
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
tx-power X
(where X - power level, dBm. Parameter can
take the following value: for Radio 1: 11-16 dBm; for Radio 2: 11-19 dBm)
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
auto-channel false
(Disable Auto Channel. To enable, enter
true
)
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
use-limit-channels false
(Disable Use Limit Channels. To
enable, enter
true
)
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
channel X
(where X - number of the static channel on which
the point will operate)
6.4.1 Advanced Radio settings:
Changing the channel bandwidth
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
bandwidth X
(where X - bandwidth. Parameter can take the
following value: for Radio 1: 20, 40; Radio 2: 20, 40, 80.)
Changing the primary channel
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
control-sideband lower
(Parameter may take values:
lower, upper. By default: for Radio 1: lower; for Radio 2: upper)
Changing a limited list of channels
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
limit-channels '1 6 11'
(where 1, 6, 11 are channels of the
range in which the tunable radio interface can operate)
Enabling the use of Short Guard Interval
WEP-2L(config):/interface/wlan0/wlan/radio-2g#
sgi true
(Enabling the use of a Short Guard Interval for data
transmission of 400 ns instead of 800 ns. To disable, enter
false
)
